The StormPOD has the typical 4 inch thin walled bumper with the plastic end caps.
We had added to our trip checklist to ensure these caps were in place, they tend to work loose and disappear.
We still use this bumper for long-term storage of a spare sewer hose so I wanted a way to keep the caps on that allows for easy access. I used the items below from Lowes to accomplish this.
 |
| Used these fasteners on each cap. |
 |
| Drilled hole in the bumper and end cap. The end caps are not stock, I replaced the stock ones with these to stop wasps from building in the bumper. |
 |
| Finished product. Did the same on the other side. The fastener is finger tight, pinching a little to prevent the fastener from backing off. |
